| Part Number | ET018003DMU |
| Mark | EDT |
| Gréisst | 1.8 |
| Applikatioun | MPH |
| Opléisung | 176×220 |
| Zesummesetzung | LCM |
| Hellegkeet | 280 |
| CR | 450:1 |
| Faarwen | 262K |
| Géigeliicht | WLED |
| Interface | TTL |
| Panel Mark | EDT |
| Panel Modell | ET018003DMU |
| Panel Typ | a-Si TFT-LCD , LCM |
| Panel Gréisst | 1.8 inch |
| Resolutioun | 176(RGB)×220 , QCIF+ |
| Display Modus | TN, Normally White, Transmissive |
| aktiv Beräich | 28.512×35.64 mm |
| skizzéieren | 34×47.2×3.5 mm |
| Uewerfläch | |
| Hellegkeet | 280 cd/m² (Typ.) |
| Kontrast Verhältnis | 450:1 (Typ.) |
| weisen Faarwen | 262K (6-bit) |
| Äntwert Zäit | 12/18 (Typ.)(Tr/Td) |
| Vue Wénkel | 75/65/75/45 (Typ.)(CR≥10)(L/R/U/D) |
| Frequenz | 60Hz |
| Lampe Typ | 1S2PWLEDWithout Driver |
| Signal Interface | Parallel RGB (1 ch, 6-bit) + SPI, 36 pins |
| Input Volt | 2.8/2.8/2.8V (Typ.)(IOVCC/VCC/VCI) |
| Applikatioun | MPH |
| A018AN03 V1 | AUO | 1.8 | 280×220 |
| EPW1802AA | Futaba | 1.8 | 160×32 |
| LCX036AMT | SONY | 1.8 | 1604×1204 |
| LM18WGSBZ05 | SHARP | 1.8 | 120×160 |
| P18BD2 | E Ink | 1.8 | 480×234 |
| RGS18160128FH003 | RiTdisplay | 1.8 | 160×128 |
| RGS18160128FH007 | RiTdisplay | 1.8 | 160×128 |
| TM018FDZ02 | Tianma | 1.8 | 128×160 |
| TM018FDZ12 | Tianma | 1.8 | 128×160 |
| UP018D11 | UNIPAC | 1.8 | 528×220(dot) |
| ACX567AKM-7 | SONY | 3.2 | 320×480 |
| AMS300FW01-0 | Samsung | 3.0 | 240×400 |
| AMS529HA01 | Samsung | 5.3 | 800×1280 |
| H598QAN01.0 | AUO | 6.0 | 1440×2560 |
| LPM055A138A | JDI | 5.5 | 1440×2560 |
| LQ043Y1DX01 | SHARP | 4.3 | 480×800 |
| LS036Y1LX03 | SHARP | 3.6 | 480×800 |
| LS050T1SX04 | SHARP | 5.0 | 1080×1920 |
| LS050T1SX06 | SHARP | 5.0 | 1080×1920 |
| OEL9M0039-Y-E | Other | 1.5 | 128×128 |