| Part Number | TX26D50VM0BAA |
| Mark | KOE |
| Gréisst | 10.4 |
| Applikatioun | MD |
| Opléisung | 800×600 |
| Zesummesetzung | LCM |
| Hellegkeet | 450 |
| CR | 800:1 |
| Faarwen | 16.7M |
| Géigeliicht | WLED |
| Interface | TTL |
| Panel Mark | HITACHI |
| Panel Modell | TX26D50VM0BAA |
| Panel Typ | a-Si TFT-LCD , LCM |
| Panel Gréisst | 10.4 inch |
| Resolutioun | 800(RGB)×600 , SVGA |
| Display Modus | IPS, Normally Black, Transmissive |
| aktiv Beräich | 211.2×158.4 mm |
| skizzéieren | 243×185.1 mm |
| Uewerfläch | |
| Hellegkeet | 450 cd/m² (Typ.) |
| Kontrast Verhältnis | 800:1 (Typ.) |
| weisen Faarwen | 16.7M (8-bit), CIE193154% |
| Äntwert Zäit | 25 (Typ.)(Tr+Td) |
| Vue Wénkel | 85/85/85/85 (Typ.)(CR≥10)(L/R/U/D) |
| Frequenz | 60Hz |
| Lampe Typ | 3S8PWLEDEmbedded (LED Driver) |
| Signal Interface | CMOS (1 ch, 8-bit), 40 pins |
| Input Volt | 3.3V (Typ.) |
| Applikatioun | MD |
| AA104XG12 | Mitsubishi | 10.4 | 1024×768 |
| CLAA104XA02CW | CPT | 10.4 | 1024×768 |
| DLC1040ABG-2 | Other | 10.4 | 800×600 |
| HT10X21-311 | HYDIS | 10.4 | 1024×768 |
| LM64C35P | SHARP | 10.4 | 640×480 |
| LQ10D341 | SHARP | 10.4 | 640×480 |
| LTM10C345 | TOSHIBA | 10.4 | 1024×768 |
| NL8060BC26-13 | NLT | 10.4 | 800×600 |
| PD104SL3 | E Ink | 10.4 | 800×600 |
| TX26D05VM1CAA | KOE | 10.4 | 640×480 |
| LAM170M023A | JDI | 17.0 | 1280×1024 |
| NL128102BM29-05A | NLT | 19.0 | 1280×1024 |
| NL160120AC27-32B | NLT | 21.3 | 1600×1200 |
| NL160120BM27-07 | NLT | 21.3 | 1600×1200 |
| NL204153AC21-22 | NLT | 21.3 | 2048×1536 |
| NL204153BM21-04A | NLT | 21.3 | 2048×1536 |
| R190EFE-L51 | Innolux | 19.0 | 1280×1024 |
| R196U2-L01 | Innolux | 19.6 | 1600×1200 |
| R213RFE-L01 | Innolux | 21.3 | 2048×1536 |
| R300M1-L01 | Innolux | 30.0 | 4096×2560 |