| Part Number | PM102WX3 |
| Mark | E Ink |
| Gréisst | 10.2 |
| Applikatioun | DPF |
| Opléisung | 800×480 |
| Zesummesetzung | CELL |
| Hellegkeet | 0 |
| CR | 400:1 |
| Faarwen | 262K |
| Géigeliicht | No B/L |
| Interface | TTL |
| Panel Mark | PVI |
| Panel Modell | PM102WX3 |
| Panel Typ | a-Si TFT-LCD , CELL |
| Panel Gréisst | 10.2 inch |
| Resolutioun | 800(RGB)×480 , WVGA |
| Display Modus | TN, Normally White, Transmissive |
| aktiv Beräich | 222×132.48 mm |
| skizzéieren | 229.9×141.5×1.7 mm |
| Uewerfläch | Antiglare |
| Glas Déift | 0.60+0.60 mm |
| transmissivitéit | 8.0% (Typ.)(with Polarizer) |
| Kontrast Verhältnis | 400:1 (Typ.) |
| weisen Faarwen | 262K (6-bit) |
| Äntwert Zäit | 15/25 (Typ.)(Tr/Td) |
| Vue Wénkel | 50/50/15/35 (Typ.)(CR≥10)(L/R/U/D) |
| Frequenz | 60Hz |
| Signal Interface | Parallel RGB (1 ch, 6-bit), 60 pins |
| Input Volt | 3.3/3.3/8.8/17.0/-10.0V (Typ.)(VCC/VDD1/VDD2/VGG/VEE) |
| Applikatioun | DPF |
| AT102TN03 V.1 | Innolux | 10.2 | 800×480 |
| AT102TN42 | Innolux | 10.2 | 1024×600 |
| C102EVN01.0 | AUO | 10.2 | 1280×720 |
| CLAA102NA0DCW | CPT | 10.2 | 1024×600 |
| CLAA102NA2CCN | CPT | 10.2 | 1024×600 |
| CLAA102NB01XV | CPT | 10.2 | 1024×600 |
| PM100WX2 | E Ink | 10.0 | 800×480 |
| PM102WX1 | E Ink | 10.2 | 800×480 |
| PM102ZY2 | E Ink | 10.2 | 1024×600 |
| TM102WV-A02-03 | SANYO | 10.2 | 800×480 |
| AT090TN12 V.3 | Innolux | 9.0 | 800×480 |
| CLAA080MB0DCW | CPT | 8.0 | 800×600 |
| CLAA080XA03BW | CPT | 8.0 | 1024×768 |
| HSD070IDW1-A00 | HannStar | 7.0 | 800×480 |
| HSD100IFW1-F03 | HannStar | 10.1 | 1024×600 |
| HSD101PFW4-A00 | HannStar | 10.1 | 1024×600 |
| LB070WV1-TD08 | LG Display | 7.0 | 800×480 |
| LSA40AT9001 | Innolux | 10.4 | 800×600 |
| TM102WV-A02-03 | SANYO | 10.2 | 800×480 |
| TX31D50VM2BAA | KOE | 12.0 | 800×480 |