| Part Number | A102VW01 V8 |
| Mark | AUO |
| Gréisst | 10.2 |
| Applikatioun | DPF |
| Opléisung | 800×480 |
| Zesummesetzung | CELL |
| Hellegkeet | 0 |
| CR | 350:1 |
| Faarwen | 262K |
| Géigeliicht | No B/L |
| Interface | TTL |
| Panel Mark | AUO |
| Panel Modell | A102VW01 V8 |
| Panel Typ | a-Si TFT-LCD , CELL |
| Panel Gréisst | 10.2 inch |
| Resolutioun | 800(RGB)×480 , WVGA |
| Display Modus | TN, Normally White, Transmissive |
| aktiv Beräich | 222×133.2 mm |
| skizzéieren | 230.6×142.3 mm |
| Uewerfläch | Antiglare |
| Glas Déift | 0.63+0.63 mm |
| transmissivitéit | 7.8% (Typ.)(with Polarizer) |
| Kontrast Verhältnis | 350:1 (Typ.) |
| weisen Faarwen | 262K (6-bit) |
| Äntwert Zäit | 12/18(Typ.)(Tr/Td) |
| Vue Wénkel | 60/60/35/60 (Typ.)(CR≥10)(L/R/U/D) |
| Frequenz | 60Hz |
| Signal Interface | Parallel RGB (1 ch, 6-bit), 60 pins |
| Input Volt | 3.3/8.8/15.0/-7.0V (Typ.)(VCC/AVDD/VGH/VGL) |
| Applikatioun | DPF |
| A102VW01 V7 | AUO | 10.2 | 800×480 |
| AT102TN03 V.1 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.3 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.8 | Innolux | 10.2 | 800×480 |
| CLAA102NA0ACG | CPT | 10.2 | 1024×600 |
| CLAA102NA0ACW | CPT | 10.2 | 1024×600 |
| CLAA102NB01XV | CPT | 10.2 | 1024×600 |
| CLAA102NC01CW | CPT | 10.2 | 1024×600 |
| PM102WX1 | E Ink | 10.2 | 800×480 |
| TX26D30VM1AAA | KOE | 10.2 | 800×256 |
| A080SN01 V5 | AUO | 8.0 | 800×600 |
| AT070TN90 V.1 | Innolux | 7.0 | 800×480 |
| AT080TN03 V.7 | Innolux | 8.0 | 800×480 |
| AT090TN12 V.3 | Innolux | 9.0 | 800×480 |
| CLAA080LA0BCW | CPT | 8.0 | 800×480 |
| DLC0800BIG-4 | Other | 8.0 | 800×600 |
| EJ080NA-05B | Innolux | 8.0 | 800×600 |
| HSD070ISN1-D00 | HannStar | 7.0 | 800×600 |
| HSD100IFW3-A00 | HannStar | 10.1 | 1024×600 |
| LQ070Y3DG01 | SHARP | 7.0 | 800×480 |