| Part Number | TMT102DMAGSD |
| Mark | Tianma |
| Gréisst | 10.2 |
| Applikatioun | DPF |
| Opléisung | 800×480 |
| Zesummesetzung | LCM |
| Hellegkeet | 350 |
| CR | 300:1 |
| Faarwen | 262K |
| Géigeliicht | CCFL |
| Interface | TTL |
| Panel Mark | TIANMA |
| Panel Modell | TMT102DMAGSD |
| Panel Typ | a-Si TFT-LCD , LCM |
| Panel Gréisst | 10.2 inch |
| Resolutioun | 800(RGB)×480 , WVGA |
| Display Modus | TN, Normally White, Transmissive |
| aktiv Beräich | 222×132.48 mm |
| skizzéieren | 235×145.8 mm |
| Uewerfläch | Antiglare |
| Hellegkeet | 350 cd/m² (Typ.) |
| Kontrast Verhältnis | 300:1 (Typ.) |
| weisen Faarwen | 262K (6-bit) |
| Äntwert Zäit | 15/35 (Typ.)(Tr/Td) |
| Vue Wénkel | 60/60/40/60 (Typ.)(CR≥10)(L/R/U/D) |
| Lampe Typ | 1 pcsCCFL |
| Signal Interface | Parallel RGB (1 ch, 6-bit) |
| Input Volt | 3.3/8.4/15/-10V (Typ.)(VCC/AVDD/VGH/VGL) |
| Applikatioun | DPF |
| AT102TN42 | Innolux | 10.2 | 1024×600 |
| C102EVN01.0 | AUO | 10.2 | 1280×720 |
| CLAA102NA01CW | CPT | 10.2 | 1024×600 |
| CLAA102NA0ACW | CPT | 10.2 | 1024×600 |
| CLAA102NA0DCW | CPT | 10.2 | 1024×600 |
| CLAA102NA1BCN | CPT | 10.2 | 1024×600 |
| CLAA102NA2CCN | CPT | 10.2 | 1024×600 |
| CLAA102NC01CW | CPT | 10.2 | 1024×600 |
| TM102WV-A02-03 | SANYO | 10.2 | 800×480 |
| TX26D30VM1AAA | KOE | 10.2 | 800×256 |
| A070SN02 V0 | AUO | 7.0 | 800×600 |
| A080SN01 V8 | AUO | 8.0 | 800×600 |
| A080SN03 V0 | AUO | 8.0 | 800×600 |
| AT090TN10 | Innolux | 9.0 | 800×480 |
| CLAA080MB0DCW | CPT | 8.0 | 800×600 |
| HSD070IDW1-A21 | HannStar | 7.0 | 800×480 |
| HSD090ICW1-A00 | HannStar | 9.0 | 640×234 |
| HSD100IFW1-C01 | HannStar | 10.1 | 1024×600 |
| LQ070Y3DG04 | SHARP | 7.0 | 800×480 |
| TM102WV-A02-03 | SANYO | 10.2 | 800×480 |