| Part Number | PM100WX5 |
| Mark | E Ink |
| Gréisst | 10.0 |
| Applikatioun | DPF |
| Opléisung | 800×480 |
| Zesummesetzung | CELL |
| Hellegkeet | 0 |
| CR | 400:1 |
| Faarwen | 262K |
| Géigeliicht | No B/L |
| Interface | TTL |
| Panel Mark | PVI |
| Panel Modell | PM100WX5 |
| Panel Typ | a-Si TFT-LCD , CELL |
| Panel Gréisst | 10.0 inch |
| Resolutioun | 800(RGB)×480 , WVGA |
| Display Modus | TN, Normally White, Transmissive |
| aktiv Beräich | 216×129.6 mm |
| skizzéieren | 225.6×139.8 mm |
| Uewerfläch | Antiglare |
| Glas Déift | 0.70+0.70 mm |
| transmissivitéit | 8.0% (Typ.)(with Polarizer) |
| Kontrast Verhältnis | 400:1 (Typ.) |
| weisen Faarwen | 262K (6-bit) |
| Äntwert Zäit | 15/25 (Typ.)(Tr/Td) |
| Vue Wénkel | 50/50/15/35 (Typ.)(CR≥10)(L/R/U/D) |
| Frequenz | 60Hz |
| Signal Interface | TTL (1 ch, 6-bit), 60 pins |
| Input Volt | 3.3/3.3/9.6/17.0/-8.0V (Typ.)(VCC/VDD1/VDD2/VGH/VEE) |
| Applikatioun | DPF |
| AT080TN03 V.7 | Innolux | 8.0 | 800×480 |
| AT090TN12 V.3 | Innolux | 9.0 | 800×480 |
| AT102TN03 V.9 | Innolux | 10.2 | 800×480 |
| CLAA070MA21BW | CPT | 7.0 | 800×600 |
| HSD070IDW1-A00 | HannStar | 7.0 | 800×480 |
| HSD070IDW1-A20 | HannStar | 7.0 | 800×480 |
| HSD070ISN1-D00 | HannStar | 7.0 | 800×600 |
| HSD100IFW1-A04 | HannStar | 10.1 | 1024×600 |
| HSD100IXN1-A00 | HannStar | 10.0 | 1024×768 |
| LQ070Y3DG01 | SHARP | 7.0 | 800×480 |