| Part Number | LB102WV1-TJ01 |
| Mark | LG Display |
| Gréisst | 10.2 |
| Applikatioun | DPF |
| Opléisung | 800×480 |
| Zesummesetzung | CELL |
| Hellegkeet | 0 |
| CR | 400:1 |
| Faarwen | 262K |
| Géigeliicht | No B/L |
| Interface | TTL |
| Panel Mark | LG.Philips LCD |
| Panel Modell | LB102WV1-TJ01 |
| Panel Typ | a-Si TFT-LCD , CELL |
| Panel Gréisst | 10.2 inch |
| Resolutioun | 800(RGB)×480 , WVGA |
| Display Modus | TN, Normally White, Transmissive |
| aktiv Beräich | 222×133.2 mm |
| skizzéieren | 230.6×142.2 mm |
| Uewerfläch | Antiglare |
| Glas Déift | 0.63+0.63 mm |
| transmissivitéit | 7.9% (Typ.)(with Polarizer) |
| Kontrast Verhältnis | 400:1 (Typ.) |
| weisen Faarwen | 262K (6-bit), CIE193145% |
| Äntwert Zäit | 7/18 (Typ.)(Tr/Td) |
| Vue Wénkel | 70/70/60/60 (Typ.)(CR≥10)(L/R/U/D) |
| Signal Interface | CMOS (1 ch, 6-bit), 60 pins |
| Input Volt | 3.3/12.0V (Typ.)(VCC/VDD) |
| rohs: | |
| Applikatioun | DPF |
| AT102TN03 V.1 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.3 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.9 | Innolux | 10.2 | 800×480 |
| C102EVN01.0 | AUO | 10.2 | 1280×720 |
| CLAA102NA0ACG | CPT | 10.2 | 1024×600 |
| CLAA102NA0ACW | CPT | 10.2 | 1024×600 |
| EZ102AS181 | PDI | 10.2 | 1024×1280 |
| PM102ZY2 | E Ink | 10.2 | 1024×600 |
| TM102WV-A02-03 | SANYO | 10.2 | 800×480 |
| TX26D89VM2BAA | KOE | 10.2 | 800×256 |
| A061VW01 V0 | AUO | 6.1 | 800×480 |
| A070SN01 V3 | AUO | 7.0 | 800×600 |
| A080SN01 V8 | AUO | 8.0 | 800×600 |
| A101VW01 V3 | AUO | 10.1 | 800×480 |
| CLAA070MA21BW | CPT | 7.0 | 800×600 |
| EK08009-70235 | Other | 8.0 | 800×600 |
| HSD084ISN1-A01 | HannStar | 8.4 | 800×600 |
| HSD101PFW2-B01 | HannStar | 10.1 | 1024×600 |
| LQ090Y3DG01A | SHARP | 9.0 | 800×480 |
| PW070XU3 | E Ink | 7.0 | 480×234 |