| Part Number | PM102ZY1 |
| Mark | E Ink |
| Gréisst | 10.2 |
| Applikatioun | DPF |
| Opléisung | 1024×600 |
| Zesummesetzung | CELL |
| Hellegkeet | 0 |
| CR | 600:1 |
| Faarwen | 262K |
| Géigeliicht | No B/L |
| Interface | TTL/RSDS |
| Panel Mark | PVI |
| Panel Modell | PM102ZY1 |
| Panel Typ | a-Si TFT-LCD , CELL |
| Panel Gréisst | 10.2 inch |
| Resolutioun | 1024(RGB)×600 , WSVGA |
| Display Modus | TN, Normally White, Transmissive |
| aktiv Beräich | 222.72×130.5 mm |
| skizzéieren | 230.62×164.2×1.63 mm |
| Uewerfläch | Antiglare |
| Glas Déift | 0.60+0.60 mm |
| transmissivitéit | 7.0% (Typ.)(with Polarizer) |
| Kontrast Verhältnis | 600:1 (Typ.) |
| weisen Faarwen | 262K (6-bit) |
| Äntwert Zäit | 15/25 (Typ.)(Tr/Td) |
| Vue Wénkel | 60/60/35/50 (Typ.)(CR≥10)(L/R/U/D) |
| Frequenz | 60Hz |
| Signal Interface | TTL/RSDS (1 ch, 6-bit), 60 pins |
| Input Volt | 3.3/3.3/9.1/17.0/-5.6V (Typ.)(VCC/VDD1VDD2/VGG/VEE) |
| Applikatioun | DPF |
| AT102TN03 V.1 | Innolux | 10.2 | 800×480 |
| AT102TN03 V.8 | Innolux | 10.2 | 800×480 |
| AT102TN42 | Innolux | 10.2 | 1024×600 |
| CLAA102NA0DCW | CPT | 10.2 | 1024×600 |
| CLAA102NA1BCN | CPT | 10.2 | 1024×600 |
| CLAA102NA2CCN | CPT | 10.2 | 1024×600 |
| PM100WX2 | E Ink | 10.0 | 800×480 |
| PM102WX1 | E Ink | 10.2 | 800×480 |
| PM102ZY2 | E Ink | 10.2 | 1024×600 |
| A080SN01 V0 | AUO | 8.0 | 800×600 |
| A080SN01 V5 | AUO | 8.0 | 800×600 |
| A080SN03 V0 | AUO | 8.0 | 800×600 |
| CLAA070MA0ACW | CPT | 7.0 | 800×600 |
| EJ080NA-04B | Innolux | 8.0 | 1024×768 |
| EJ080NA-05B | Innolux | 8.0 | 800×600 |
| HSD070IDW1-A00 | HannStar | 7.0 | 800×480 |
| HSD070IDW1-A30 | HannStar | 7.0 | 800×480 |
| LW700AT9901 | Innolux | 7.0 | 800×480 |
| P64AN2AP08 | E Ink | 6.4 | 320×234 |